0 просмотров
Рейтинг статьи
1 звезда2 звезды3 звезды4 звезды5 звезд
Загрузка...

Beats audio cannot find startup file

Содержание

Beats audio cannot find startup file

‎11-06-2011 03:41 PM

Whenever I try to use the Beats Audio Control panel On my Pavillion DV6-6102AX it comes up with the error «cannot find the .startup file!» I am using Windows 7 64-bit and I also have tried reinstalling the IDT audio driver but that did not solve my problem.

  • Mark as New
  • Bookmark
  • Subscribe
  • Subscribe to RSS Feed
  • Permalink
  • Print
  • Email to a Friend
  • Flag Post

Reasons for the “system cannot find the file specified” error

To begin with, hare are the main factors that can lead to a “system cannot find the file specified” error:

  • Registry problems, such as invalid keys
  • Problems with a connection
  • Wrong file resolution
  • Source volume may contain disk errors
  • During backing up of files, something went wrong and caused a “system cannot find the file specified” error

As you can see, the factors are quite serious, so take seriously the choice of how to the fix the “system cannot find the file specified” error method.

Method 1. Start with Antivirus Check

First of all, check your system for viruses and other malware using a powerful antivirus application. Very often, files can be damaged precisely because of viruses and other malware. Therefore, do not overlook this method.

If it didn’t help, it’s not big deal; proceed to the next solution.

Method 2. Update Your Windows

Often, when Windows offers to update the system, users neglect this recommendation, postponing this action for later. Unfortunately, inaction can lead to errors, like “the system cannot find the file specified”. Therefore, upgrade Windows using the following recommendations:

Press Windows + I at the same time, then click on the “Update and Security” tab.

Now left-click on the “Check for Updates” tab. Check for updates and install them. At the end of the process, restart the operating system.

If this solution does not help, proceed to the following.

Method 3. Use SFC to Solve the Error

SFC scanning is another good option to fix the “system cannot find the file specified” error. To do this, open the command line by right-clicking on Start and selecting Command Prompt (as administrator).

In Command Prompt, type the following command: “sfc /scannow”. Now press Enter. After scanning and correcting errors, restart the computer and check if the “system cannot find the file specified” error is fixed.

Method 4. Correct System Log Files

It is often possible to fix the “system cannot find the file specified” error using system log files. Do the following:

Go to the directory C: / Windows / INF

Then, in the INF folder, find the setupapi.dev.log file and open it by double-clicking the left mouse button.

At the same time, press and hold the Ctrl and F keys. A new line will appear where you need to enter the following: “cannot find the file” and hit the Enter key. You will see the missing files. Select the desired one, copy it and paste it into the Windows / INF folder.

It is also recommended to reinstall the driver and restart the computer.

* If you never worked with the log files — better skip that method.

Method 5. Update or Reinstall Drivers

If you have installed some driver on your computer and get an error, you should try to reinstall the latest installed driver; maybe the whole problem is there.

Right-click on Start and select Device Manager. Right-click on the driver. From the list, select Delete.

Download a new driver version and install it.

You can also check for driver updates by selecting the driver and right-click “Search for updates”; maybe they are outdated and thus caused the system to display the “system cannot find the file specified” error.

How to fix error: Can not find script file C:WINDOWSrun.vbs?

1. Use a Windows restore point

Because of the black screen, it’s difficult to locate and uninstall the malicious software that’s causing startup issues.

As a result, you should use your system’s restore point and revert the OS to the point where this malware wasn’t present on your machine.

To run System Restore, do the following:

  1. Press Windows Key + R to open the Run dialog. Now enter %systemroot%system32rstrui.exe and press Enter or click OK.
  2. Select Choose a different restore point and click Next.
  3. Now check Show more restore points checkbox and select the desired restore point from the menu. Pay attention to the Date and Time section, and pick a time when the issue wasn’t present on your PC. Now click Next to proceed.
  4. Follow the instructions on the screen to complete the restoration process.

2. Run the commands listed below

If there is no system restore point available on your computer, follow the troubleshooting steps listed below:

  1. Type cmd in the Search Menu > run Command Prompt as an administrator.
  2. Type the following commands:
  • reg add “HKLMSoftwareMicrosoftWindows NTCurrentVersionWinlogon” /v “Shell” /t REG_SZ /d “explorer.exe” /f
  • reg add “HKLMSoftwareMicrosoftWindows NTCurrentVersionWinlogon” /v “Userinit” /t REG_SZ /d “C:WindowsSystem32userinit.exe,” /f
  • reg add “HKLMSoftwareWow6432NodeMicrosoftWindows NTCurrentVersionWinlogon” /v “Shell” /t REG_SZ /d “explorer.exe” /f

After you run all commands, restart your PC.

3. Perform a detailed system scan

It’s rather likely that run.vbs error was caused by malware on your PC. Sometimes malware will modify your registry and cause this problem to appear.

To make sure that your system is malware-free, we advise you to perform a full system scan with your antivirus. It’s worth mentioning that not all antivirus tools are equally effective, so you might want to consider our top picks.

Once you perform a full system scan and remove all malware from your PC, the problem should be completely resolved.

4. Modify your registry

If you’re getting run.vbs error on your PC, the problem might lie in your registry. Sometimes malicious applications can modify your registry and cause this issue to appear.

However, you can fix the problem simply by making a couple of changes in your registry. To do that, just follow these steps:

  1. Press Windows Key + R and enter regedit. Now press Enter or click OK.
  2. When Registry Editor opens, navigate to HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionWinlogon in the left pane. In the right pane, double-click the Userinit value.
  3. Make sure that Value data is set to C:Windowssystem32userinit.exe, and now click OK to save changes.

Sometimes your PC might be infected with malware, and that malware will change the Userinit value in your registry. However, after modifying the registry, the issue should be completely resolved.

Several users reported that they are getting a black screen that is preventing them to do anything on their PC. If this happens, you won’t be able to access Registry Editor using the conventional methods.

Читать еще:  Isz чем открыть в Windows 10

However, you can avoid this problem by doing the following:

  1. Press Ctrl + Shift + Esc to open Task Manager.
  2. When Task Manager opens, go to File > Run new task.
  3. Enter regedit and press Enter.

After Registry Editor opens, follow the instructions from above to change Userinit value.

5. Change the value of .vbs key in the registry

According to users, run.vbs error can appear on your PC because the value of .vbs key was changed. To fix this problem, you need to do the following:

  1. Open Registry Editor like we showed you in the previous solution.
  2. Navigate to ComputerHKEY_CLASSES_ROOT.vbs in the left pane. In the right pane, double-click the (Default) value.
  3. Set the Value data to VBSFile and click OK.

After making these changes, check if the problem is resolved.

6. Perform SFC and DISM scans

If you’re having run.vbs error on your PC, the cause might be the corruption of system files. However, you can fix this issue simply by running SFC and DISM scans on your PC. To do that, follow these steps:

  1. Press Windows Key + X to open Win + X menu. Choose Command Prompt (Admin) or PowerShell (Admin).
  2. When Command Prompt starts, enter sfc /scannow command and run it.
  3. The SFC scan will now commence. Keep in mind that the scan can take about 15 minutes, so don’t interfere with it in any way.

After the SFC scan is finished, the problem should be resolved. If this issue is still present, you need to perform a DISM scan. You can do that by following these steps:

  1. Start Command Prompt as administrator.
  2. Run DISM /Online /Cleanup-Image /RestoreHealth command.
  3. The DISM scan will now start. This scan can take about 20 minutes or more, so don’t interrupt it.

Once the DISM scan is finished, check if the problem is still there. If DISM failed on Windows 10, fix it with the help of this complete guide.

If you can’t see anything except the black screen, you’ll have to run Command Prompt by doing the following:

  1. Press Ctrl + Shift + Esc to start Task Manager.
  2. Now go to File > Run new task.
  3. Enter cmd and make sure to check Create this task with administrative privileges. Now click OK or press Enter.
  4. Once the Command Prompt starts, run both SFC and DISM scans.

7. Navigate to Safe Mode

Safe Mode is a segment of Windows that runs with default settings, so it’s perfect for troubleshooting problems such as run.vbs error. To enter Safe Mode, follow these steps:

  1. Restart your PC several times during the boot sequence.
  2. You’ll see three options available. Choose Troubleshoot > Advanced options > Startup Settings. Click the Restart button.
  3. Your PC will now restart. Once your PC boots, select any version of Safe Mode by pressing the appropriate key on your keyboard.

Once you enter Safe Mode, check if the problem is still there. If the issue doesn’t appear in Safe Mode, you can use it to fix the problem.

8. Create a new user account

If you keep getting run.vbs error on your PC, you might be able to fix the problem simply by creating a new user account. Sometimes this problem can only affect your account, but you can fix that by doing the following:

  1. Go to Settings app >Accounts.
  2. Go to Family & other people. Select Add someone else to this PC in the right pane.
  3. Select I don’t have this person’s sign-in information.
  4. Up next, choose Add a user without a Microsoft account.
  5. Enter the desired username and click Next.

If you can’t access the Settings app due to this issue, you can create a user account from the Command Prompt. To do that, follow these steps:

  1. Start Command Prompt as an administrator.
  2. When the Command Prompt starts, run the following commands:
  • net user /addyour_username
  • new localgroup administratorsyour_username/add

After running these two commands, you’ll create a new administrator account on your PC. Simply switch to the new administrative account and check if the issue appears there as well.

If the issue isn’t present on the new account, move your personal files to it, and start using it instead of your old account.

Run.vbs error can be quite annoying, but we hope you managed to fix it by using one of our solutions.

FAQ: Learn more about Script errors

  • How do I stop Script errors?

To stop Script errors from showing up, tell your browser to ignore them. If you still get the errors, chances are the antivirus is involved, so use a great uninstaller software tool to confirm this scenario.

  • What causes Script errors?

Script errors are usually caused by an error within a script that’s hosted on a different domain. They may also be related to some sort of spyware or adware infection.

  • Why do I keep getting Script errors?

You keep getting Script errors when violating the browser’s policy or if your computer is infected with malware. It’s essential to use a reliable antivirus to prevent that from happening.

Editor’s Note: This post was originally published in January 2017 and has been since completely revamped and updated for freshness, accuracy, and comprehensiveness.

Beats audio cannot find .startup file

‎04-15-2012 09:51 AM

Just tried this and when I run the file it aborts with message «the hardware detected is not supported by this IDT software package». PC is a new HP Touchsmart 520 – Windows 7, 64 bit. Also, sound is diabled at end of process. ??

  • Mark as New
  • Bookmark
  • Subscribe
  • Subscribe to RSS Feed
  • Permalink
  • Print
  • Email to a Friend
  • Flag Post

How to fix error: Can not find script file C:WINDOWSrun.vbs?

1. Use a Windows restore point

Because of the black screen, it’s difficult to locate and uninstall the malicious software that’s causing startup issues.

As a result, you should use your system’s restore point and revert the OS to the point where this malware wasn’t present on your machine.

To run System Restore, do the following:

  1. Press Windows Key + R to open the Run dialog. Now enter %systemroot%system32rstrui.exe and press Enter or click OK.
  2. Select Choose a different restore point and click Next.
  3. Now check Show more restore points checkbox and select the desired restore point from the menu. Pay attention to the Date and Time section, and pick a time when the issue wasn’t present on your PC. Now click Next to proceed.
  4. Follow the instructions on the screen to complete the restoration process.

2. Run the commands listed below

If there is no system restore point available on your computer, follow the troubleshooting steps listed below:

  1. Type cmd in the Search Menu > run Command Prompt as an administrator.
  2. Type the following commands:
  • reg add “HKLMSoftwareMicrosoftWindows NTCurrentVersionWinlogon” /v “Shell” /t REG_SZ /d “explorer.exe” /f
  • reg add “HKLMSoftwareMicrosoftWindows NTCurrentVersionWinlogon” /v “Userinit” /t REG_SZ /d “C:WindowsSystem32userinit.exe,” /f
  • reg add “HKLMSoftwareWow6432NodeMicrosoftWindows NTCurrentVersionWinlogon” /v “Shell” /t REG_SZ /d “explorer.exe” /f

After you run all commands, restart your PC.

3. Perform a detailed system scan

It’s rather likely that run.vbs error was caused by malware on your PC. Sometimes malware will modify your registry and cause this problem to appear.

To make sure that your system is malware-free, we advise you to perform a full system scan with your antivirus. It’s worth mentioning that not all antivirus tools are equally effective, so you might want to consider our top picks.

Once you perform a full system scan and remove all malware from your PC, the problem should be completely resolved.

4. Modify your registry

If you’re getting run.vbs error on your PC, the problem might lie in your registry. Sometimes malicious applications can modify your registry and cause this issue to appear.

However, you can fix the problem simply by making a couple of changes in your registry. To do that, just follow these steps:

  1. Press Windows Key + R and enter regedit. Now press Enter or click OK.
  2. When Registry Editor opens, navigate to HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionWinlogon in the left pane. In the right pane, double-click the Userinit value.
  3. Make sure that Value data is set to C:Windowssystem32userinit.exe, and now click OK to save changes.

Sometimes your PC might be infected with malware, and that malware will change the Userinit value in your registry. However, after modifying the registry, the issue should be completely resolved.

Several users reported that they are getting a black screen that is preventing them to do anything on their PC. If this happens, you won’t be able to access Registry Editor using the conventional methods.

However, you can avoid this problem by doing the following:

Читать еще:  Для чего нужна кнопка FN на клавиатуре

  1. Press Ctrl + Shift + Esc to open Task Manager.
  2. When Task Manager opens, go to File > Run new task.
  3. Enter regedit and press Enter.

After Registry Editor opens, follow the instructions from above to change Userinit value.

5. Change the value of .vbs key in the registry

According to users, run.vbs error can appear on your PC because the value of .vbs key was changed. To fix this problem, you need to do the following:

  1. Open Registry Editor like we showed you in the previous solution.
  2. Navigate to ComputerHKEY_CLASSES_ROOT.vbs in the left pane. In the right pane, double-click the (Default) value.
  3. Set the Value data to VBSFile and click OK.

After making these changes, check if the problem is resolved.

6. Perform SFC and DISM scans

If you’re having run.vbs error on your PC, the cause might be the corruption of system files. However, you can fix this issue simply by running SFC and DISM scans on your PC. To do that, follow these steps:

  1. Press Windows Key + X to open Win + X menu. Choose Command Prompt (Admin) or PowerShell (Admin).
  2. When Command Prompt starts, enter sfc /scannow command and run it.
  3. The SFC scan will now commence. Keep in mind that the scan can take about 15 minutes, so don’t interfere with it in any way.

After the SFC scan is finished, the problem should be resolved. If this issue is still present, you need to perform a DISM scan. You can do that by following these steps:

  1. Start Command Prompt as administrator.
  2. Run DISM /Online /Cleanup-Image /RestoreHealth command.
  3. The DISM scan will now start. This scan can take about 20 minutes or more, so don’t interrupt it.

Once the DISM scan is finished, check if the problem is still there. If DISM failed on Windows 10, fix it with the help of this complete guide.

If you can’t see anything except the black screen, you’ll have to run Command Prompt by doing the following:

  1. Press Ctrl + Shift + Esc to start Task Manager.
  2. Now go to File > Run new task.
  3. Enter cmd and make sure to check Create this task with administrative privileges. Now click OK or press Enter.
  4. Once the Command Prompt starts, run both SFC and DISM scans.

7. Navigate to Safe Mode

Safe Mode is a segment of Windows that runs with default settings, so it’s perfect for troubleshooting problems such as run.vbs error. To enter Safe Mode, follow these steps:

  1. Restart your PC several times during the boot sequence.
  2. You’ll see three options available. Choose Troubleshoot > Advanced options > Startup Settings. Click the Restart button.
  3. Your PC will now restart. Once your PC boots, select any version of Safe Mode by pressing the appropriate key on your keyboard.

Once you enter Safe Mode, check if the problem is still there. If the issue doesn’t appear in Safe Mode, you can use it to fix the problem.

8. Create a new user account

If you keep getting run.vbs error on your PC, you might be able to fix the problem simply by creating a new user account. Sometimes this problem can only affect your account, but you can fix that by doing the following:

  1. Go to Settings app >Accounts.
  2. Go to Family & other people. Select Add someone else to this PC in the right pane.
  3. Select I don’t have this person’s sign-in information.
  4. Up next, choose Add a user without a Microsoft account.
  5. Enter the desired username and click Next.

If you can’t access the Settings app due to this issue, you can create a user account from the Command Prompt. To do that, follow these steps:

  1. Start Command Prompt as an administrator.
  2. When the Command Prompt starts, run the following commands:
  • net user /addyour_username
  • new localgroup administratorsyour_username/add

After running these two commands, you’ll create a new administrator account on your PC. Simply switch to the new administrative account and check if the issue appears there as well.

If the issue isn’t present on the new account, move your personal files to it, and start using it instead of your old account.

Run.vbs error can be quite annoying, but we hope you managed to fix it by using one of our solutions.

FAQ: Learn more about Script errors

  • How do I stop Script errors?

To stop Script errors from showing up, tell your browser to ignore them. If you still get the errors, chances are the antivirus is involved, so use a great uninstaller software tool to confirm this scenario.

  • What causes Script errors?

Script errors are usually caused by an error within a script that’s hosted on a different domain. They may also be related to some sort of spyware or adware infection.

  • Why do I keep getting Script errors?

You keep getting Script errors when violating the browser’s policy or if your computer is infected with malware. It’s essential to use a reliable antivirus to prevent that from happening.

Editor’s Note: This post was originally published in January 2017 and has been since completely revamped and updated for freshness, accuracy, and comprehensiveness.

Submit correction

If you see anything in the documentation that is not correct, does not match your experience with the particular feature or requires further clarification, please use this form to report a documentation issue.

Copyright © 1996-2020 The PostgreSQL Global Development Group

Reasons for the “system cannot find the file specified” error

To begin with, hare are the main factors that can lead to a “system cannot find the file specified” error:

  • Registry problems, such as invalid keys
  • Problems with a connection
  • Wrong file resolution
  • Source volume may contain disk errors
  • During backing up of files, something went wrong and caused a “system cannot find the file specified” error

As you can see, the factors are quite serious, so take seriously the choice of how to the fix the “system cannot find the file specified” error method.

Method 1. Start with Antivirus Check

First of all, check your system for viruses and other malware using a powerful antivirus application. Very often, files can be damaged precisely because of viruses and other malware. Therefore, do not overlook this method.

If it didn’t help, it’s not big deal; proceed to the next solution.

Method 2. Update Your Windows

Often, when Windows offers to update the system, users neglect this recommendation, postponing this action for later. Unfortunately, inaction can lead to errors, like “the system cannot find the file specified”. Therefore, upgrade Windows using the following recommendations:

Press Windows + I at the same time, then click on the “Update and Security” tab.

Now left-click on the “Check for Updates” tab. Check for updates and install them. At the end of the process, restart the operating system.

If this solution does not help, proceed to the following.

Method 3. Use SFC to Solve the Error

SFC scanning is another good option to fix the “system cannot find the file specified” error. To do this, open the command line by right-clicking on Start and selecting Command Prompt (as administrator).

In Command Prompt, type the following command: “sfc /scannow”. Now press Enter. After scanning and correcting errors, restart the computer and check if the “system cannot find the file specified” error is fixed.

Method 4. Correct System Log Files

It is often possible to fix the “system cannot find the file specified” error using system log files. Do the following:

Go to the directory C: / Windows / INF

Then, in the INF folder, find the setupapi.dev.log file and open it by double-clicking the left mouse button.

At the same time, press and hold the Ctrl and F keys. A new line will appear where you need to enter the following: “cannot find the file” and hit the Enter key. You will see the missing files. Select the desired one, copy it and paste it into the Windows / INF folder.

It is also recommended to reinstall the driver and restart the computer.

* If you never worked with the log files — better skip that method.

Method 5. Update or Reinstall Drivers

If you have installed some driver on your computer and get an error, you should try to reinstall the latest installed driver; maybe the whole problem is there.

Right-click on Start and select Device Manager. Right-click on the driver. From the list, select Delete.

Download a new driver version and install it.

You can also check for driver updates by selecting the driver and right-click “Search for updates”; maybe they are outdated and thus caused the system to display the “system cannot find the file specified” error.

Contents [show]

Ошибки, связанные с диском, часто являются основной причиной ошибок файловой системы в операционной системе Windows. Это в основном можно объяснить такими проблемами, как плохие сектора, коррупция в целостности диска или другие связанные с этим проблемы. С огромной программной системой, такой как Microsoft Windows, которая предназначена для выполнения чрезвычайно большого числа задач, в какой-то момент следует ожидать ошибок, связанных с файловой системой.

Читать еще:  В биосе нет secure boot что делать

Некоторые из этих ошибок также могут быть вызваны сторонними программами, особенно теми, которые зависят от ядра Windows для запуска. Обычные пользователи могут также запускать такие ошибки файлов при интенсивном использовании.

How to fix error: Can not find script file C:WINDOWSrun.vbs?

1. Use a Windows restore point

Because of the black screen, it’s difficult to locate and uninstall the malicious software that’s causing startup issues.

As a result, you should use your system’s restore point and revert the OS to the point where this malware wasn’t present on your machine.

To run System Restore, do the following:

  1. Press Windows Key + R to open the Run dialog. Now enter %systemroot%system32rstrui.exe and press Enter or click OK.
  2. Select Choose a different restore point and click Next.
  3. Now check Show more restore points checkbox and select the desired restore point from the menu. Pay attention to the Date and Time section, and pick a time when the issue wasn’t present on your PC. Now click Next to proceed.
  4. Follow the instructions on the screen to complete the restoration process.

2. Run the commands listed below

If there is no system restore point available on your computer, follow the troubleshooting steps listed below:

  1. Type cmd in the Search Menu > run Command Prompt as an administrator.
  2. Type the following commands:
  • reg add “HKLMSoftwareMicrosoftWindows NTCurrentVersionWinlogon” /v “Shell” /t REG_SZ /d “explorer.exe” /f
  • reg add “HKLMSoftwareMicrosoftWindows NTCurrentVersionWinlogon” /v “Userinit” /t REG_SZ /d “C:WindowsSystem32userinit.exe,” /f
  • reg add “HKLMSoftwareWow6432NodeMicrosoftWindows NTCurrentVersionWinlogon” /v “Shell” /t REG_SZ /d “explorer.exe” /f

After you run all commands, restart your PC.

3. Perform a detailed system scan

It’s rather likely that run.vbs error was caused by malware on your PC. Sometimes malware will modify your registry and cause this problem to appear.

To make sure that your system is malware-free, we advise you to perform a full system scan with your antivirus. It’s worth mentioning that not all antivirus tools are equally effective, so you might want to consider our top picks.

Once you perform a full system scan and remove all malware from your PC, the problem should be completely resolved.

4. Modify your registry

If you’re getting run.vbs error on your PC, the problem might lie in your registry. Sometimes malicious applications can modify your registry and cause this issue to appear.

However, you can fix the problem simply by making a couple of changes in your registry. To do that, just follow these steps:

  1. Press Windows Key + R and enter regedit. Now press Enter or click OK.
  2. When Registry Editor opens, navigate to HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionWinlogon in the left pane. In the right pane, double-click the Userinit value.
  3. Make sure that Value data is set to C:Windowssystem32userinit.exe, and now click OK to save changes.

Sometimes your PC might be infected with malware, and that malware will change the Userinit value in your registry. However, after modifying the registry, the issue should be completely resolved.

Several users reported that they are getting a black screen that is preventing them to do anything on their PC. If this happens, you won’t be able to access Registry Editor using the conventional methods.

However, you can avoid this problem by doing the following:

  1. Press Ctrl + Shift + Esc to open Task Manager.
  2. When Task Manager opens, go to File > Run new task.
  3. Enter regedit and press Enter.

After Registry Editor opens, follow the instructions from above to change Userinit value.

5. Change the value of .vbs key in the registry

According to users, run.vbs error can appear on your PC because the value of .vbs key was changed. To fix this problem, you need to do the following:

  1. Open Registry Editor like we showed you in the previous solution.
  2. Navigate to ComputerHKEY_CLASSES_ROOT.vbs in the left pane. In the right pane, double-click the (Default) value.
  3. Set the Value data to VBSFile and click OK.

After making these changes, check if the problem is resolved.

6. Perform SFC and DISM scans

If you’re having run.vbs error on your PC, the cause might be the corruption of system files. However, you can fix this issue simply by running SFC and DISM scans on your PC. To do that, follow these steps:

  1. Press Windows Key + X to open Win + X menu. Choose Command Prompt (Admin) or PowerShell (Admin).
  2. When Command Prompt starts, enter sfc /scannow command and run it.
  3. The SFC scan will now commence. Keep in mind that the scan can take about 15 minutes, so don’t interfere with it in any way.

After the SFC scan is finished, the problem should be resolved. If this issue is still present, you need to perform a DISM scan. You can do that by following these steps:

  1. Start Command Prompt as administrator.
  2. Run DISM /Online /Cleanup-Image /RestoreHealth command.
  3. The DISM scan will now start. This scan can take about 20 minutes or more, so don’t interrupt it.

Once the DISM scan is finished, check if the problem is still there. If DISM failed on Windows 10, fix it with the help of this complete guide.

If you can’t see anything except the black screen, you’ll have to run Command Prompt by doing the following:

  1. Press Ctrl + Shift + Esc to start Task Manager.
  2. Now go to File > Run new task.
  3. Enter cmd and make sure to check Create this task with administrative privileges. Now click OK or press Enter.
  4. Once the Command Prompt starts, run both SFC and DISM scans.

7. Navigate to Safe Mode

Safe Mode is a segment of Windows that runs with default settings, so it’s perfect for troubleshooting problems such as run.vbs error. To enter Safe Mode, follow these steps:

  1. Restart your PC several times during the boot sequence.
  2. You’ll see three options available. Choose Troubleshoot > Advanced options > Startup Settings. Click the Restart button.
  3. Your PC will now restart. Once your PC boots, select any version of Safe Mode by pressing the appropriate key on your keyboard.

Once you enter Safe Mode, check if the problem is still there. If the issue doesn’t appear in Safe Mode, you can use it to fix the problem.

8. Create a new user account

If you keep getting run.vbs error on your PC, you might be able to fix the problem simply by creating a new user account. Sometimes this problem can only affect your account, but you can fix that by doing the following:

  1. Go to Settings app >Accounts.
  2. Go to Family & other people. Select Add someone else to this PC in the right pane.
  3. Select I don’t have this person’s sign-in information.
  4. Up next, choose Add a user without a Microsoft account.
  5. Enter the desired username and click Next.

If you can’t access the Settings app due to this issue, you can create a user account from the Command Prompt. To do that, follow these steps:

  1. Start Command Prompt as an administrator.
  2. When the Command Prompt starts, run the following commands:
  • net user /addyour_username
  • new localgroup administratorsyour_username/add

After running these two commands, you’ll create a new administrator account on your PC. Simply switch to the new administrative account and check if the issue appears there as well.

If the issue isn’t present on the new account, move your personal files to it, and start using it instead of your old account.

Run.vbs error can be quite annoying, but we hope you managed to fix it by using one of our solutions.

FAQ: Learn more about Script errors

  • How do I stop Script errors?

To stop Script errors from showing up, tell your browser to ignore them. If you still get the errors, chances are the antivirus is involved, so use a great uninstaller software tool to confirm this scenario.

  • What causes Script errors?

Script errors are usually caused by an error within a script that’s hosted on a different domain. They may also be related to some sort of spyware or adware infection.

  • Why do I keep getting Script errors?

You keep getting Script errors when violating the browser’s policy or if your computer is infected with malware. It’s essential to use a reliable antivirus to prevent that from happening.

Editor’s Note: This post was originally published in January 2017 and has been since completely revamped and updated for freshness, accuracy, and comprehensiveness.

Ссылка на основную публикацию
Статьи c упоминанием слов:
Adblock
detector