2 просмотров
Рейтинг статьи
1 звезда2 звезды3 звезды4 звезды5 звезд
Загрузка...

Solved SMART Hard Disk Error: 301

[Solved] SMART Hard Disk Error: 301

Summary: If you are on this blog then you must have faced hard disk error 301 and looking for its solution. But before jumping to its solution you should know why this error code appears, what are the root causes of this issue and how many methods are actually available to fix it. This post holds all the required information regarding this 301 hard disk error code issue.

SMART Hard Disk Error 301 is an unpredicted error message that indicates hard drive failure or severe drive corruption. This error is related to HP laptops, which comes with HP SMART check embedded in the firmware. The HP SMART check is a customized version of Power-On-Self-Test (POST) check that scans hardware for issues when you boot the system. During the scan, if it finds a hardware-related issue, the firmware displays error code such as SMART hard disk error 301 when it encounters problems with the internal hard disk.

Also, this error in HP notebooks is quite common and occurs unexpectedly. You never know when your HP laptop might throw this error. Moreover, it doesn’t let you boot Windows OS. Therefore, when the error 301 occurs, you must be prepared as it becomes crucial for you to act immediately and appropriately to prevent data loss. Below we have discussed a few troubleshooting methods along with a few tips and software solution that can probably help you solve the hard drive error before the situation worsens.

Additionally, if the error isn’t fixed, the guide will also help you get your data back securely.

Why SMART Hard Disk Error 301 Occurs?

To solve the issue, we need to first understand the reasons to why SMART hard disk error 301 occurs. Then, accordingly, you can take measures to prevent such issues in future. Following are some of the factors that can lead to SMART hard disk error 301:

  • Outdated or Misconfigured BIOS
  • Loose connection
  • Application or Driver conflicts
  • Virus issues
  • File corruption
  • Unexpected shutdown
  • Power surge
  • Physical damage

How to Solve SMART Hard Disk Error 301

1. Change Boot Priority Order

Turn off your HP laptop and then turn it on. Immediately start pressing BIOS key, usually F10 in HP laptops and desktops, continuously until you see the BIOS screen

  • Use left/right arrow keys and go to ‘Advanced’ tab
  • Using up/down arrow key, move the selection to ‘Boot Order.
  • Follow the on-screen instructions and move the hard disk to top in the boot order
  • Press F10 key to save changes and exit the BIOS

Alternatively, you can press F9 key continuously after pressing the power button to enter boot priority order. Use up/down arrow key and select your hard drive to boot Windows.

If the Windows starts, log in to your system and immediately backup your data. If it doesn’t boot up, proceed to the next troubleshooting method.

2. Reset BIOS

SMART disk error 301 can also occur when there is an issue with the BIOS/firmware. This issue could arise over a period as you use your system and tweak BIOS settings that sometimes coincide and lead to such errors.

To solve this, you can update BIOS. When an update is not available, we recommend you to reset the BIOS configuration by following these steps:

  • Follow steps given above solution to enter the BIOS
  • Press F9 key to reset BIOS
  • Then press F10 to save and exit the BIOS settings menu

Your system will reboot. Let it boot and if this fixes the error, immediately backup; else follow the next troubleshooting method.

3. Reseat Hard Drive

It’s possible that connection between the hard drive and the laptop might have loosened due to shock, physical damage, etc. Ensure a firm connection between the hard drive and the motherboard by reseating the hard drive.

Be careful while playing with the internals of the laptop as it may further damage your laptop. If you are not familiar with the hardware part, skip this method.

4. Hard Reboot

While system reboot is the first step to troubleshooting, sometimes restarting a system doesn’t necessarily fix some issues such as SMART disk error 301. In such a case, you need to shut down the system and discharge traces of current from the motherboard. This is referred to as a hard reboot.

To hard reboot your HP laptop, follow these steps:

  • Shutdown the system
  • Disconnect the power cable
  • Remove the battery
  • Press and hold the power button for 15-20 seconds in order to discharge every bit of current left in the motherboard (inside capacitors, coils, etc.)
  • Wait for a few minutes and repeat once again
  • Then connect the battery and turn on your laptop

Hopefully, this fixes the issue; if it doesn’t, the drive might have got corrupt. Follow the next method to recover your data and fix the drive error.

5. Use Data Recovery Software

The above-mentioned troubleshooting methods should fix the issue. However, sometimes, the hard drive gets severely corrupt, and common troubleshooting doesn’t work.

So when the described methods fail, you must rely on a data recovery solution such as Stellar Data Recovery Standard. The software helps you recover your inaccessible data securely from a severely corrupt hard drive using the ‘Deep Scan’ functionality.

Follow the steps below to restore your data from an HP hard drive showing SMART disk error 301:

  1. Remove the hard drive from the system and use an use an HDD enclosure to connect your hard drive to a different Windows PC
  2. Download, install and run the Stellar Data Recovery Standard software
  3. Select ‘All Data’ and click ‘Next.

  1. Under ‘Connected Drives’, select your affected hard drive and click ‘Scan.’ If the drive volume isn’t visible, click ‘Can’t Find Drive’, click ‘Scan’ and follow these steps:
  • Choose your connected HP hard Drive from the ‘Select Drive’ list and click ‘Search.
  • The software quickly scans your drive for lost, invisible, severely corrupt, or deleted partitions and lists them under ‘Partitions Found’ list box.
  • In case the desired partition isn’t listed after the scan, click ‘Deep Scan’ begin thorough partition scan
  • Then select the partition from the ‘Partition Found’ list and click ‘Scan’. Resume with the steps given below
  1. Once the scan is over, the software lists the recoverable files. Use search and filter option to locate important files quickly.
  2. Further, you can run ‘Deep Scan’ by clicking ‘Click Here’ link at the bottom of the software window if desired files are not found
  3. After the scan, select the files you wish to recover and click the ‘Recover’ button
  4. Choose a save location and click ‘Start Saving’ to save files at your desired location

Now you can open the Disk management tool and format your drive. We recommend you not to use the same drive after repair as it may fail again. It’s better to buy a new hard drive and replace the faulty one. You may also choose to upgrade your hard drive to an SSD.

Читать еще:  От чего зависит разрядность операционной системы

Conclusion

Smart Disk Error 301 is an abrupt error that frequently leads to data loss. Maintaining regular backup is an effective preemptive measure to address data loss situations that arise due to disk error 301.

However, it’s recommended to also have a data recovery software in case the backup is either obsolete or unavailable.

A software such as Stellar Data Recovery can not only recover inaccessible data but also proactively monitors hard drives to safeguard from impending drive failure and SMART disk error 301.

About The Author

Aruna

Aruna Attri is a Senior Data Recovery Expert at Stellar®. She is a technology blogger and Windows expert. She has experience in Windows data recovery domain. She loves to troubleshoot Windows issue and write technical tips and tutorials.

Short DST Failed: a Sign of Hard Disk Failure

There are two kinds of disk self-test: Short DST and Long DST; the term DST is actually the acronym of Disk Self Test. When a short DST is performed on a hard drive, only the major components (such as platters, read/write heads and ROM) will be checked. Generally, the test process only lasts for a few minutes, and you can still use the disk during it.

  • If the main components all function within acceptable parameters, the short DST will be finished.
  • If there is a problem with any of the components, the system will give you a warning message saying that short DST failed.

Hard Drive Short DST Check Failed HP

Usually, the short DST will be executed when you restart the laptop. When any problem is found on the hard drive component, the DST short test cannot be finished successfully. You’ll then see the error message indicating hard disk short DST failure. So how to fix when you find the hard disk short DST failed? There are 3 methods for fixing HP laptop hard drive short DST check failed issue.

Fix 1: check the disk for errors.

  1. If your HP computer is broken and can’t boot up, you need a Windows media driver, such as a CD or a flash drive.
  2. Insert the Windows media driver.
  3. Enter BIOS to change the boot sequence to make OS boot from the recovery drive.
  4. Exit BIOS and save changes.
  5. Select the correct language and click Next in the setup window.
  6. Click Repair your computer.
  7. Select Troubleshoot.
  8. Select Command Prompt in the Advanced Options window.
  9. Type chkdsk /r and hit Enter.
  10. It will scan the disk; if any errors are found, it will try to repair them.
  11. Exit the Command Prompt and restart your computer.
  12. Disconnect the recovery drive.
  13. Change the boot order to let OS boot from hard drive to check whether the problem is fixed or not.

A lot of users complained that the CHKDSK command has deleted useful files on the hard drive; if you’re one of the victims, please read this page carefully:

Does CHKDSK utility delete your important data? Here are ways to help your recover CHKDSK deleted files in few steps.

Fix 2: restore to a previous point.

The hard drive short DST failed error may appear when there is software conflict on your HP.

  • If you have installed antivirus software or safeguard software on computer, you should disable it temporarily and see what happens.
  • If it fails to work, please try uninstall the software completely.

There’s a good way to fix the issue: restore your PC to a previous point when the error didn’t occur; you can finish this through System Restore or Reset this PC.

This method only works when the System Restore has been enabled before the short DST failed. The recovery drive is still necessary if you’re not able to enter the OS. Then, do the following things:

  1. Boot from the recovery drive.
  2. Select Troubleshoot.
  3. Select Advanced options.
  4. Choose System Restore.
  5. Choose a proper Restore Point created automatically or manually.
  6. Finish the restore to try to fix the issue.

Fix 3: replace the hard drive with a new one.

If the hard disk short DST failure is actually caused by serious physical damage on your HP hard drive, you have no choice but to give up on the disk.

  • If it is still under warranty, you should contact the service center.
  • If the warranty period has expired, you can only buy a new hard drive.
  • Facebook
  • Twitter
  • Linkedin
  • Reddit

Smart Hard Dick Error 301 HP что делать

Давайте мы первым делом дадим ответ на поставленный в заголовке вопрос, чтобы нетерпеливые пользователи не читали всю статью в поисках одной маленькой истины.

Сообщение при загрузке компьютера Smart Hard Disk Error 301 HP как исправить? Ответ — никак! Нет нет, не в том плане, что компьютер больше нельзя загрузить, а в том плане, что скорее всего необходимо будет менять винчестер.

Полное послание вашей системы выглядит следующим образом:

«Smart Hard Disk Error
The smart hard disk check has detected an imminent failure. To ensure not data loss, please backup the content immediately and run the Hard Disk Test in system diagnostics.
Hard Disk 1 (301)
F2 system diagnostics
Enter — continue startup».

Собственно говоря, если вы нажмете Enter, то возможно вам повезет и ваш компьютер запустится, однако происходит это не всегда.

Если вы увидели сообщение при загрузке компьютера, которое гласит Smart Hard Disk Error, то имейте в виду у вашего винчестера появились проблемы. Загрузиться вы загрузитесь, но скорее всего, вам нужно копить деньги на покупку нового жесткого диска. Впрочем, если вы не храните ничего важного, то пользуйтесь винчестером, пока он окончательно не помрет.

О чем нам говорит сообщение Smart Hard Disk Error? Данное сообщение говорит нам о том, что на винчестере появилось много бэдов (битых секторов), а невозможность загрузится говорит о том, что эти сектора расположены в загрузочной области.

Так что же делать?

Снимаем винчестер и подключаем к другому компьютеру в качестве второстепенного.

После мы берем любую программу которая умеет исправлять бэды, можно воспользоваться встроенной в операционную систему Windows утилиту ScanDisk. Сканирует ваш жесткий диск и устраняем все бэды, которые можно устранить.

Дальше, вы можете вставить винчестер назад себе в компьютер и если бэды в загрузочной части устранены, то ваша операционная система Windows загрузится.

Мы рекомендуем скопировать вашу информацию на другой носитель и купить себе новый жесткий диск — так вы хотя бы не потеряете свою информацию, в случае если ваш винчестер выйдет из строя или говоря компьютерным языком посыпется.

Бэды могут появиться как в результате физического воздействия, так и в результате времени, если ваш винчестер уже старый. Также и неумелое обращение с компьютером, в программном смысле, может тоже привести к появлению бэдов.

Избавиться от бэдов можно и даже просто, но как правило такой винчестер уже будет работать с некоторыми перебоями и по хорошему нуждается в замене.

Если вы пользуетесь ноутбуком, то при копировании фалов желательно чтобы ваш ноутбук стоял, а не висел в воздухе сотрясаясь. При тряске в момент записи вы можете запросто получить бэды.

Если не стоит, как бы это банально не звучало бить свой системный блок ногами. Зачастую, в большинстве случаев, бэды возникают по причине того, что системный блок стоит под столом и частенько ему прилетает от нерадивого пользователя, причем прилетает в прямом смысле.

В следующий раз, увидев жуткое сообщение:

«Smart Hard Disk Error
The smart hard disk check has detected an imminent failure. To ensure not data loss, please backup the content immediately and run the Hard Disk Test in system diagnostics.
Hard Disk 1 (301)
F2 system diagnostics
Enter — continue startup»

Не пугайтесь, ведь теперь вы знаете что делать.

1. Диагностика жесткого диска.
2. Бэкап важных данных
3. Замена жесткого диска (винчестера на новый).

Спасибо за внимание, берегите свою информацию и не забывайте делать резервную копию всего, что вам дорого.

Applies to: You can boot into the computer

When you are faced with hard drive DST short test failure, you can update your device driver to fix it if you can boot into your computer. Here are the steps to update the HDD driver:

Step 1. Right-click This PC > click «Manage». On the left side, click «Device Manager».

Step 2. Double-click to expand Disk driver. Right-click your disk driver and choose «Update Driver Software».

Step 3. In the pop-up window, choose «Search automatically for updated driver software». Then, wait for the computer to search and install the latest driver software.

Читать еще:  Что значит приставка TI в видеокартах Nvidia

What is a hard drive short DST check”?

DST stands for Disk Self Test, and there are two different kinds of disk self-test your hard drive can undergo. One test is the long Disk Self Test or long DST, and the other test is the short Disk Self Test or short DST. These tests are both procedures a hard drive can make itself undergo to gauge its performance and its health.

When your hard drive runs a short DST, it quickly takes stock of its various components. The short DST only focuses on the major components, such as the read/write heads, ROM, platters, control board, and motor. It makes sure these major components all function within acceptable parameters and returns a warning message if any of them do not. This process only takes a few minutes, during which you can still use the hard drive.

In a long or extended DST, in addition to testing the hard drive’s major components, it also conducts a thorough review of the data on your platters. If the long DST uncovers damaged or corrupted areas of the disk, it works to reallocate and re-map the damaged portions. This way, your hard drive will not run into these bad areas again.

The only difference between a short DST and a long DST is that one is more in-depth than the other and that a long DST consumes enough resources that you cannot use your hard drive while performing the test. Both short DST and long DST are non-destructive tests, meaning they do not alter or destroy the data on your drive.

RELATED ARTICLES:
  • Short DST Repair in Seagate Hard Drive
  • Hard Drive with “Inaccessible Boot Device”
  • Dell Error Code 2000-0142: What Is It?

Can I fix a hard disk short DST failed error message?

Your hard drive depends on its heads, platters, control board, and motor to function. Unfortunately, any one of the components failing spells doom for your hard drive. There is no way to fix any of these components on your own.

Even professional data recovery experts can only make temporary repairs.

However, you might also get a hard disk short DST failed error for another, more benign reason. It could have to do with the connection between your hard drive and your computer.

If the SATA or IDE cable connecting your hard drive to your motherboard comes loose or degrades, it could result in performance issues since data cannot flow to and from the hard drive. Adjusting or replacing the cable may fix a hard disk short DST error.

When you encounter a hard disk short DST failed error message, pay close attention to your hard disk drive’s behavior.

If you notice the drive failing to spin up, or if it makes strange noises such as beeping or clicking, unplug it immediately. This behavior indicates severe disk failure.

What does «hard drive short DST check failed« mean?

If the BIOS gives you a short DST failure error message, it’s a sign that your hard drive no longer works properly. You should focus on getting a replacement hard disk drive, either through your PC manufacturer’s warranty program or on your own. If you need data recovered from a hard disk that has failed a short DST check, contact one of our recovery client advisors today.

How do I run a short DST on a hard disk?

You can run a disk self-check on your computer’s hard drive using a wide variety of tools, depending on the manufacturer. For example, if you own a Dell or HP PC, you can rely on diagnostic tools built right into the BIOS at startup. You can assess the health of a Seagate hard drive using SeaTools. Western Digital hard drives can be tested using Data Lifeguard. You can run both short and extended diagnostic tests.

Software tools help you monitor your hard drive’s health using S.M.A.R.T. This acronym stands for “Self-Monitoring, Analysis, and Reporting Technology.” S.M.A.R.T. is built into every hard disk drive and measures just about every aspect of its behavior from read/write speeds and error rates to the internal temperature of your drive.

Get Smart With S.M.A.R.T.

The goal of S.M.A.R.T. is to predict hard drive failure. By measuring so many operating parameters, your hard drive can catch itself if its performance begins to fall below optimal standards in any area and send you warning signs. The alerts it sends should give you enough advance warning to start copying over any important files you don’t have backed up before your drive bites the dust.

S.M.A.R.T parameters are mostly standardized so that self-testing works the same way even between models of HDD by competing manufacturers, but not fully. Due to the lack of full standardization, your hard drive might struggle to send its findings to you, even if your PC has a motherboard with S.M.A.R.T. capabilities. The next thing you know, you’ve come face to face with a short DST failed error.

You can’t always rely on your computer to be smart enough (or, well, S.M.A.R.T. enough) to tell you if it’s about to fail. That’s why it’s a good idea to regularly run disk self-checks on your own—as well as make sure you’re always keeping your files backed up!

Accidents happen, and if you run into trouble, you can count on Gillware to provide expert, professional, and secure data recoery services.

How to fix SMART 301 hard disk error?

Run test in BIOS Menu

If, you still see the message, try solution 2.

Run chkdsk command

It might be possible that bad sectors, directory errors, cross-linked files, lost clusters, and more are causing 301 error. In that case, you can use chkdsk to repair the smart hard disk error. Steps are:

Note: When you run the chkdsk, there are chances of losing data. So, take a backup of your files before running check disk.

If it also fails, try out solution 3.

Verify a Drive for Errors

It might be possible that physical issues or performance issues are causing hard drive 301 error. In such a case, you can check a drive. Steps are:

If it also fails, then don’t lose hope.

What then is the Solution?

It might be possible that even after practicing all these methods, you still are facing this issue. In such a case, contact a professional data recovery expert like Stellar Data Recovery.

It is because Stellar Data Recovery has more than 2 decades of experience in dealing with hard drive failure. Above all, we are acknowledged with the CIO Choice 2019 Award for Best Data Recovery Services.

Every year, we securely and efficiently handled 50,000+ Data Recovery cases. And, because of this only we have attained a wide clientele of almost 3 Million+ satisfied customer across 15 locations in India.

Striking USPs of Stellar:

What is a hard drive short DST check”?

DST stands for Disk Self Test, and there are two different kinds of disk self-test your hard drive can undergo. One test is the long Disk Self Test or long DST, and the other test is the short Disk Self Test or short DST. These tests are both procedures a hard drive can make itself undergo to gauge its performance and its health.

When your hard drive runs a short DST, it quickly takes stock of its various components. The short DST only focuses on the major components, such as the read/write heads, ROM, platters, control board, and motor. It makes sure these major components all function within acceptable parameters and returns a warning message if any of them do not. This process only takes a few minutes, during which you can still use the hard drive.

In a long or extended DST, in addition to testing the hard drive’s major components, it also conducts a thorough review of the data on your platters. If the long DST uncovers damaged or corrupted areas of the disk, it works to reallocate and re-map the damaged portions. This way, your hard drive will not run into these bad areas again.

The only difference between a short DST and a long DST is that one is more in-depth than the other and that a long DST consumes enough resources that you cannot use your hard drive while performing the test. Both short DST and long DST are non-destructive tests, meaning they do not alter or destroy the data on your drive.

Читать еще:  Что такое SWAY в Windows 10
RELATED ARTICLES:
  • Short DST Repair in Seagate Hard Drive
  • Hard Drive with “Inaccessible Boot Device”
  • Dell Error Code 2000-0142: What Is It?

Can I fix a hard disk short DST failed error message?

Your hard drive depends on its heads, platters, control board, and motor to function. Unfortunately, any one of the components failing spells doom for your hard drive. There is no way to fix any of these components on your own.

Even professional data recovery experts can only make temporary repairs.

However, you might also get a hard disk short DST failed error for another, more benign reason. It could have to do with the connection between your hard drive and your computer.

If the SATA or IDE cable connecting your hard drive to your motherboard comes loose or degrades, it could result in performance issues since data cannot flow to and from the hard drive. Adjusting or replacing the cable may fix a hard disk short DST error.

When you encounter a hard disk short DST failed error message, pay close attention to your hard disk drive’s behavior.

If you notice the drive failing to spin up, or if it makes strange noises such as beeping or clicking, unplug it immediately. This behavior indicates severe disk failure.

What does «hard drive short DST check failed« mean?

If the BIOS gives you a short DST failure error message, it’s a sign that your hard drive no longer works properly. You should focus on getting a replacement hard disk drive, either through your PC manufacturer’s warranty program or on your own. If you need data recovered from a hard disk that has failed a short DST check, contact one of our recovery client advisors today.

How do I run a short DST on a hard disk?

You can run a disk self-check on your computer’s hard drive using a wide variety of tools, depending on the manufacturer. For example, if you own a Dell or HP PC, you can rely on diagnostic tools built right into the BIOS at startup. You can assess the health of a Seagate hard drive using SeaTools. Western Digital hard drives can be tested using Data Lifeguard. You can run both short and extended diagnostic tests.

Software tools help you monitor your hard drive’s health using S.M.A.R.T. This acronym stands for “Self-Monitoring, Analysis, and Reporting Technology.” S.M.A.R.T. is built into every hard disk drive and measures just about every aspect of its behavior from read/write speeds and error rates to the internal temperature of your drive.

Get Smart With S.M.A.R.T.

The goal of S.M.A.R.T. is to predict hard drive failure. By measuring so many operating parameters, your hard drive can catch itself if its performance begins to fall below optimal standards in any area and send you warning signs. The alerts it sends should give you enough advance warning to start copying over any important files you don’t have backed up before your drive bites the dust.

S.M.A.R.T parameters are mostly standardized so that self-testing works the same way even between models of HDD by competing manufacturers, but not fully. Due to the lack of full standardization, your hard drive might struggle to send its findings to you, even if your PC has a motherboard with S.M.A.R.T. capabilities. The next thing you know, you’ve come face to face with a short DST failed error.

You can’t always rely on your computer to be smart enough (or, well, S.M.A.R.T. enough) to tell you if it’s about to fail. That’s why it’s a good idea to regularly run disk self-checks on your own—as well as make sure you’re always keeping your files backed up!

Accidents happen, and if you run into trouble, you can count on Gillware to provide expert, professional, and secure data recoery services.

More efficient way of hard disk error 301 repair

Although you can fix hard disk error 301 with one of the solutions offered above, the whole process is complicated and time-consuming, especially for those who are not much of a computer person. Is there a time-saving and simple solution? Disk clone is the answer.

If you have cloned the hard drive in your HP computer when it’s in good condition, you can fix the hard disk 301 error by a simple hard disk swap. Then, you can go back to your work immediately. What you need is professional disk cloning software—AOMEI Backupper Standard.

With the Disk Clone feature in AOMEI Backupper, you can clone the original HP hard drive to another drive with just a few clicks. Download this freeware and install it on your computer. Launch AOMEI Backupper and go to Clone > Disk Clone. Follow the wizard to finish the cloning process.

Short DST Failed: a Sign of Hard Disk Failure

There are two kinds of disk self-test: Short DST and Long DST; the term DST is actually the acronym of Disk Self Test. When a short DST is performed on a hard drive, only the major components (such as platters, read/write heads and ROM) will be checked. Generally, the test process only lasts for a few minutes, and you can still use the disk during it.

  • If the main components all function within acceptable parameters, the short DST will be finished.
  • If there is a problem with any of the components, the system will give you a warning message saying that short DST failed.

Hard Drive Short DST Check Failed HP

Usually, the short DST will be executed when you restart the laptop. When any problem is found on the hard drive component, the DST short test cannot be finished successfully. You’ll then see the error message indicating hard disk short DST failure. So how to fix when you find the hard disk short DST failed? There are 3 methods for fixing HP laptop hard drive short DST check failed issue.

Fix 1: check the disk for errors.

  1. If your HP computer is broken and can’t boot up, you need a Windows media driver, such as a CD or a flash drive.
  2. Insert the Windows media driver.
  3. Enter BIOS to change the boot sequence to make OS boot from the recovery drive.
  4. Exit BIOS and save changes.
  5. Select the correct language and click Next in the setup window.
  6. Click Repair your computer.
  7. Select Troubleshoot.
  8. Select Command Prompt in the Advanced Options window.
  9. Type chkdsk /r and hit Enter.
  10. It will scan the disk; if any errors are found, it will try to repair them.
  11. Exit the Command Prompt and restart your computer.
  12. Disconnect the recovery drive.
  13. Change the boot order to let OS boot from hard drive to check whether the problem is fixed or not.

A lot of users complained that the CHKDSK command has deleted useful files on the hard drive; if you’re one of the victims, please read this page carefully:

Does CHKDSK utility delete your important data? Here are ways to help your recover CHKDSK deleted files in few steps.

Fix 2: restore to a previous point.

The hard drive short DST failed error may appear when there is software conflict on your HP.

  • If you have installed antivirus software or safeguard software on computer, you should disable it temporarily and see what happens.
  • If it fails to work, please try uninstall the software completely.

There’s a good way to fix the issue: restore your PC to a previous point when the error didn’t occur; you can finish this through System Restore or Reset this PC.

This method only works when the System Restore has been enabled before the short DST failed. The recovery drive is still necessary if you’re not able to enter the OS. Then, do the following things:

  1. Boot from the recovery drive.
  2. Select Troubleshoot.
  3. Select Advanced options.
  4. Choose System Restore.
  5. Choose a proper Restore Point created automatically or manually.
  6. Finish the restore to try to fix the issue.

Fix 3: replace the hard drive with a new one.

If the hard disk short DST failure is actually caused by serious physical damage on your HP hard drive, you have no choice but to give up on the disk.

  • If it is still under warranty, you should contact the service center.
  • If the warranty period has expired, you can only buy a new hard drive.
  • Facebook
  • Twitter
  • Linkedin
  • Reddit
Ссылка на основную публикацию
Статьи c упоминанием слов:
Adblock
detector