Thread: Odin *Complete(Write) operation failed*
Содержание
- 1 Thread: Odin *Complete(Write) operation failed*
- 1.1 Типичные ошибки при прошивки Samsung в ODIN
- 1.1.1 Ошибка подключения устройства
- 1.1.2 Samsung «не виден» в Odin
- 1.1.3 Файл Прошивки битый: MD5 hash value is invalid
- 1.1.4 Ошибки при прошивке разделов system.img, boot.img, recovery.img, sboot.bin, cache.img и других разделов
- 1.1.5 Ошибки связанные с повреждением разделов памяти Samsung
- 1.1.6 Ошибки с отсутствием возможности доступа к записи разделов
- 1.1.7 Samsung не запускается
- 1.2 Part 2. The Best Alternative to Odin Mode
- 1.2.1 Related Articles:
- 1.2.2 Типичные ошибки при прошивки Samsung в ODIN
- 1.2.3 Ошибка подключения устройства
- 1.2.4 Samsung «не виден» в Odin
- 1.2.5 Файл Прошивки битый: MD5 hash value is invalid
- 1.2.6 Ошибки при прошивке разделов system.img, boot.img, recovery.img, sboot.bin, cache.img и других разделов
- 1.2.7 Ошибки связанные с повреждением разделов памяти Samsung
- 1.2.8 Ошибки с отсутствием возможности доступа к записи разделов
- 1.2.9 Samsung не запускается
- 1.3 Ошибки из-за повреждения разделов памяти Samsung
- 1.4 Типові помилки при прошивки Samsung в ODIN
- 1.4.1 Помилка підключення пристрою
- 1.4.2 Samsung «не видно» в Odin
- 1.4.3 Файл битий: MD5 hash value is invalid
- 1.4.4 Помилки при прошивці розділів system.img, boot.img, recovery.img, sboot.bin, cache.img і інших розділів
- 1.4.5 Помилки пов’язані з пошкодженням розділів пам’яті Samsung
- 1.4.6 Помилки з відсутністю можливості доступу до запису розділів
- 1.4.7 Samsung не запускається
- 1.5 Шаг 2: Перевод устройства в режим загрузки
- 1.6 Part 1: What is Odin Mode?
- 1.7 Reader Interactions
- 1.1 Типичные ошибки при прошивки Samsung в ODIN
I failed so hard..
I didnґt look at the buildnumber or the number I need, and tried to install a random stock firmware for my Galaxy S4..
Now I canґt boot, because i wiped it, and Odin gives me this error:
Or something else..
I tried the following FWґs:
-I9505XXUFNB9
-I9505XXUGNG8
-I9505XXUGNK4
-I9505XXUHOA7
-I9505XXUHOB7
-I9505XXUHPK2
With some, odin donґt even start (Keeps at «SetupConnection..»).
I tried to flash CWM, but there it just gives me this error with any FW:
With TWRP it always gives me the Error:
«could not find ‘meta-inf/com/google/android/update-binary’ in the zip file»
With adb, i get this:
error: no devices/emulators found. (But with adb devices I see the device)
What can I do. There are so many Firmwares out there, I need so much luck to pick the right one..
Maybe it helps if I tell you some information on the Case:
GT-I9505
Germany (No brand, but Eplus conenction)
Android: Jellybean
Serialnumber: R31DB1ZMF1V
SSN: -l9505GSMH
I donґt know what to do now.. Itґs a pain to download 1000 firmwares, and nothing works..
Can somebody help me?
I would be so happy..
Thank you in advance
Best regards
Last edited by iLeGiTiMx; 03-02-2017 at 18:06 .
I failed so hard..
I didnґt look at the buildnumber or the number I need, and tried to install a random stock firmware for my Galaxy S4..
Now I canґt boot, because i wiped it, and Odin gives me this error:
Or something else..
I tried the following FWґs:
-I9505XXUFNB9
-I9505XXUGNG8
-I9505XXUGNK4
-I9505XXUHOA7
-I9505XXUHOB7
-I9505XXUHPK2
With some, odin donґt even start (Keeps at «please wait»).
I tried to flash CWM, but there it just gives me this error with any FW:
With TWRP it always gives me the Error:
«could not find ‘meta-inf/com/google/android/update-binary’ in the zip file»
With adb, i get this:
error: no devices/emulators found. (But with adb devices I see the device)
What can I do. There are so many Firmwares out there, I need so much luck to pick the right one..
Maybe it helps if I tell you some information on the Case:
GT-I9505
Germany (No brand, but Eplus conenction)
Android: Jellybean
Serialnumber: R31DB1ZMF1V
SSN: -l9505GSMH
I donґt know what to do now.. Itґs a pain to download 1000 firmwares, and nothing works..
Can somebody help me?
I would be so happy..
Thank you in advance
Best regards
Can i ask you if you have activated usb debugging in developers options?
Because, it seems that odin can’t write.
The steps that i follow: install drivers, activate usb debugging, wait, before flash by odin, that PC recognizes the device.
Another question. what android version have you got? You say jelly bean, but 4.2.2, 4.3.
Enviado desde mi GT-I9506 mediante Tapatalk
Типичные ошибки при прошивки Samsung в ODIN
Ошибка подключения устройства
Вариант 1
Вариант 2
Решение:
- Убедиться что устройство переведено в специальный режим обновления Downloading, если это не так то перевести;
- Убедиться в целостности используемого USB-шнура (при необходимости заменить), если кабель не оригинальный заменить на оригинальный. Кабель вставить в задний порт USB 2.0 системного блока компьютера.
Samsung «не виден» в Odin
В Odin не отображается ID и COM подключенного смартфона или планшета Samsung
Решение:
- Убедиться что устройство переведено в специальный режим обновления Downloading, если это не так то перевести;
- Убедиться в целостности используемого USB-шнура (при необходимости заменить), если кабель не оригинальный заменить на оригинальный. Кабель вставить в задний порт USB 2.0 системного блока компьютера;
- Скачать другую версию Odin;
- Запустить Odin от имени администратора;
- Перезагрузить компьютер;
- Удалить программу Kies и драйверы Samsung, перезагрузить компьютер и снова их установить;
- Временно отключить антивирусник;
- Если на компьютере установлена еще одна ОС Windows, то попробовать произвести прошивку с нее или прошить на другом ПК;
- Произвести прошивку на другом компьютере;
- Убедиться что ваш Samsung не является китайской поделкой, если это не так то повторить пункты 1-9.
Процесс прошивки остановлен на процессе инициализации
(проверка подключения)
Если при прошивке Samsung в программе ODIN появиться ошибка:
Вариант 1
Вариант 2
Решение: Необходимо подключить устройство в другой USB порт, либо попробовать прошить Samsung на другом компьютере.
Файл Прошивки битый: MD5 hash value is invalid
Если Odin не дает прошить Android и выдает подобную ошибку:
Это означает что, вы скачали битый файл (недокачанный) или файл не верно подписан.
Решение: Стоит убедиться действительно ли файл прошивки скачанный полностью, если нет, то перекачать. Если файл скачан полностью, удалить с файла расширение .md5
Ошибки при прошивке разделов system.img, boot.img, recovery.img,
sboot.bin, cache.img и других разделов
и другие похожие варианты, но с разными разделами.
Может возникнуть из-за того, что вы пытаетесь прошить либо битый файл прошивки или от другого устройства Samsung ( у вас модель i9100, а прошиваете от i9300). Также это может быть следствие попытки понизить версию ОС Android.
Решение:
- Скачать прошивку с альтернативного источника, если присутствует какое либо описание к файлу, то прочитать;
- Убедиться что прошивка предназначена для вашего устройства Samsung;
- В случае необходимости понижения версии ОС Android, пересобрать прошивку удалив файл sboot.bin;
- В случае перехода с кастомной прошивки на официальную, в начале выполнить сброс (wipe data и wipe system).
Ошибки связанные с повреждением разделов памяти Samsung
Вариант 1
Вариант 2
Вариант 3
Данные проблемы могут возникнуть в следствие повреждения разметки секторов внутренних разделов флеш-памяти устройства, попытки прошить чужой или модифицированный PIT файл, либо поврежден загрузчик
Решение:
- Попытаться найти 4-х файловую сервисную прошивку в интернете, а также PIT файл для вашего устройства и произвести прошивку в Odin;
- В случае не удачной попытки обратиться в СЦ.
Ошибки с отсутствием возможности доступа к записи разделов
Изменить несколько параметров в настройках:
- Включить «Отладку по USB» и там в же настройках включить «Разблокировка OEM»;
- Отключить «Удаленное управление» Samsung;
Samsung не запускается
Если у вас на экране похожее соображение, то это означает что предыдущая прошивка была прервана:
Решение:
- Найдите прошивку Samsung для своего устройства, скачайте ее, после чего установите с помощью Odin, после чего попробуйте снова загрузить девайс (если не сработает переходим ко второму пункту);
- Выполните сброс данных (wipe data/factory reset), после чего попробуйте снова загрузить девайс.
Вот и все! Оставайтесь вместе с сайтом Android +1, дальше будет еще интересней! Больше статей и инструкций читайте в разделе Статьи и Хаки Android.
Part 2. The Best Alternative to Odin Mode
Instead of Odin mode, you can use iMyFone Fixppo for Android OS repair tool which is more effective than the Odin mode. For fixing all Android system issues, many people have been using Fixppo for Android. It is a professional OS repair tool that is developed to fix issues like phone stuck on recovery mode, boot loop or black /white screen, phone freezing, etc.
It is designed using the latest technology, thus, most of Android system issues can be fixed.
With the 100% success rate of repairing, you can fix the issues on your Android within minutes.
It has been trusted by many professional websites world wide, so it is safe to use this tool.
In this section, you will learn how to use Fixppo for Android as an alternative to Odin mode.
Step 1: Open Fixppo for Android on the computer and click on Start on the Home page.
Step 2: Now give your device details and select the options accordingly and click Download Firmware. The firmware will be downloaded automatically by the program once you give the details. Check if the displayed device information is correct.
Step 3: Next, connect your device to the computer. You need to put the device be in «Download Mode» before you start fixing this issue. Once the phone enters the Download mode, the fixing process will start. Once the process is over, the phone will restart, fixing all Android issues.
Why Choose iMyFone Fixppo for Android instead of Odin Mode?
When you use Odin for flashing the device, you need some specialized knowledge about Android technology. But for using Fixppo for Android, you don’t need any technical knowledge. If you use Odin mode, you need to find the firmware on your own. But with Fixppo for Android, all you need to do is only 3 clicks.
Conclusion
Odin Mode is a great tool for flashing the device, but when it fails or if there is any issue while using Odin, you may not do normal boot on your device. Then you can use Fixppo for Android which comes with the 100% success rate in repairing and will not cause any other issues. If you want to know more about this topic, write your questions down below in the comment section.
By Robert Moore , to Android Issues
Posted on Jul 29, 2019 ( Updated: Oct 15, 2019 )
Related Articles:
- Best 5 Ways to Fix White Screen on Android Phone/Tablet
- 6 Ways Will Make It Easy on How to Fix & Flash Dead Android
- [Top 6 Ways] Android Stuck on Boot Screen (after Factory Reset)
Home >
Copyright © 2020 iMyFone Technology Co., Ltd. All Rights Reserved
Типичные ошибки при прошивки Samsung в ODIN
Ошибка подключения устройства
Вариант 1
Вариант 2
Решение:
- Убедиться что устройство переведено в специальный режим обновления Downloading, если это не так то перевести;
- Убедиться в целостности используемого USB-шнура (при необходимости заменить), если кабель не оригинальный заменить на оригинальный. Кабель вставить в задний порт USB 2.0 системного блока компьютера.
Samsung «не виден» в Odin
В Odin не отображается ID и COM подключенного смартфона или планшета Samsung
Решение:
1. Убедиться что устройство переведено в специальный режим обновления Downloading, если это не так то перевести;
27820823767eb149d68fcb23575e2fa7
2. Убедиться в целостности используемого USB-шнура (при необходимости заменить), если кабель не оригинальный заменить на оригинальный. Кабель вставить в задний порт USB 2.0 системного блока компьютера;
3. Скачать другую версию Odin ;
4. Запустить Odin от имени администратора;
5. Перезагрузить компьютер;
6. Удалить программу Kies и драйверы Samsung , перезагрузить компьютер и снова их установить;
7. Временно отключить антивирусник;
8. Если на компьютере установлена еще одна ОС Windows, то попробовать произвести прошивку с нее или прошить на другом ПК;
9. Произвести прошивку на другом компьютере;
10. Убедиться что ваш Samsung не является китайской поделкой, если это не так то повторить пункты 1-9.
Процесс прошивки остановлен на процессе инициализации (проверка подключения)
Если при прошивке Samsung в программе ODIN появиться ошибка:
Вариант 1
Вариант 2
Решение: Необходимо подключить устройство в другой USB порт, либо попробовать прошить Samsung на другом компьютере.
Файл Прошивки битый: MD5 hash value is invalid
Если Odin не дает прошить Android и выдает подобную ошибку:
Это означает что, вы скачали битый файл (недокачанный) или файл не верно подписан.
Решение: Стоит убедиться действительно ли файл прошивки скачанный полностью, если нет, то перекачать. Если файл скачан полностью, удалить с файла расширение .md5
Ошибки при прошивке разделов system.img, boot.img, recovery.img, sboot.bin, cache.img и других разделов
и другие похожие варианты, но с разными разделами.
Может возникнуть из-за того, что вы пытаетесь прошить либо битый файл прошивки или от другого устройства Samsung ( у вас модель i9100, а прошиваете от i9300). Также это может быть следствие попытки понизить версию ОС Android.
Решение:
- Скачать прошивку с альтернативного источника, если присутствует какое либо описание к файлу, то прочитать;
- Убедиться что прошивка предназначена для вашего устройства Samsung;
- В случае необходимости понижения версии ОС Android, пересобрать прошивку удалив файл sboot.bin;
- В случае перехода с кастомной прошивки на официальную, в начале выполнить сброс (wipe data и wipe system).
Ошибки связанные с повреждением разделов памяти Samsung
Вариант 1
Вариант 2
Вариант 3
Данные проблемы могут возникнуть в следствие повреждения разметки секторов внутренних разделов флеш-памяти устройства, попытки прошить чужой или модифицированный PIT файл, либо поврежден загрузчик
Решение:
- Попытаться найти 4-х файловую сервисную прошивку в интернете, а также PIT файл для вашего устройства и произвести прошивку в Odin;
- В случае не удачной попытки обратиться в СЦ.
Ошибки с отсутствием возможности доступа к записи разделов
Изменить несколько параметров в настройках:
1. Включить « Отладку по USB » и там в же настройках включить «Разблокировка OEM»;
2. Отключить «Удаленное управление» Samsung;
Samsung не запускается
Если у вас на экране похожее соображение, то это означает что предыдущая прошивка была прервана:
Решение:
- Найдите прошивку Samsung для своего устройства, скачайте ее, после чего установите с помощью Odin, после чего попробуйте снова загрузить девайс (если не сработает переходим ко второму пункту);
- Выполните сброс данных (wipe data/factory reset), после чего попробуйте снова загрузить девайс.
Ошибки из-за повреждения разделов памяти Samsung
Get PIT for mapping..
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
Re-Partition operation failed.
All threads completed. (succeed 0 / failed 1)
Данные ошибки могут возникнуть вследствие повреждения разметки секторов загрузочных разделов памяти аппарата, или же при попытке прошить чужой или модифицированный PIT-файл. Постарайтесь найти прошивку для вашего устройства, которая состоит из 4 файлов, и в которой присутствует PIT-файл разметки.
Типові помилки при прошивки Samsung в ODIN
Помилка підключення пристрою
File analysis..
SetupConnection..
All threads completed. (succeed 0 / failed 1)
File analysis..
SetupConnection..
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
Samsung «не видно» в Odin
У Odin не відображається ID і COM підключеного смартфона або планшета Samsung
Процес прошивки зупинений на процесі ініціалізації
(перевірка підключення)
Якщо при прошивці Samsung в програмі ODIN з’явитися помилка:
SetupConnection..
Can’t open the serial(COM) порт.
All threads completed. (succeed 0 / failed 1)
Odin v.3 engine (ID:4)..
File analysis..
SetupConnection..
Initialzation..
Рішення: Необхідно підключити пристрій до іншого USB порт, або спробувати прошити Samsung на іншому комп’ютері.
Файл битий: MD5 hash value is invalid
Якщо Odin не дає прошити Android і видає таку помилку:
Added!!
Enter CS for MD5..
Check MD5.. Do not unplug the cable..
Please wait..
MD5 hash value is invalid
xxxxxxxxxxx.tar.md5 is invalid.
End.
Це означає що, ви скачали битий файл (недокачанный) або файл не вірно підписаний.
Рішення: чи Варто переконатися, чи справді файл завантажений повністю, якщо ні, то перекачати. Якщо файл завантажено повністю, видалити з файлу розширення .md5
Помилки при прошивці розділів system.img, boot.img, recovery.img,
sboot.bin, cache.img і інших розділів
system.img
FAIL!
recovery.img
FAIL!
sboot.bin
NAND Write Start!!
FAIL!
FAIL!
Re-Partition operation failed.
All threads completed. (succeed 0 / failed 1)
та інші подібні варіанти, але з різними розділами.
Може виникнути із-за того, що ви намагаєтеся прошити або битий файл прошивки або від іншого пристрою Samsung ( модель i9100, а прошиваете від i9300). Також це може бути наслідок спроби знизити версію ОС Android.
Помилки пов’язані з пошкодженням розділів пам’яті Samsung
Get PIT for mapping..
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
Re-Partition operation failed.
All threads completed. (succeed 0 / failed 1)
Get PIT for mapping..
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
Дані проблеми можуть виникнути в наслідок пошкодження розмітки секторів внутрішніх розділів флеш-пам’яті пристрою, спроби прошити чужий або модифікований PIT файл, або пошкоджений завантажувач
Помилки з відсутністю можливості доступу до запису розділів
Custom Binary(RECOVERY) Blocked By FAP Lock
Змінити кілька параметрів у налаштуваннях:


Samsung не запускається
Якщо у вас на екрані схоже уваги, то це означає що попередня прошивка була перервана
На цьому все! Залишайтеся з Android 1! Передплачуйте у соціальні групи! Далі буде цікавіше!
Шаг 2: Перевод устройства в режим загрузки
Программа Odin способна взаимодействовать с девайсом Samsung только в том случае, если последнее находится в специальном Download-режиме.
- Для входа в этот режим полностью выключаем устройство, зажимаем аппаратную клавишу «Громкость-», затем клавишу «Home» и удерживая их нажимаем кнопку включения аппарата.
Part 1: What is Odin Mode?
Samsung Odin Mode, better known as Download Mode, is a screen you see on your Samsung device when you press the Volume down, power and home button together. Samsung Odin Mode screen gives you two options, namely “Continue” by pressing the volume up button and “Cancel” by pressing the volume down button. Another way to recognize the Samsung Odin Mode is that screen will display a triangle with Android Symbol on it and a message saying “Downloading”.
If you tap on “Cancel” by pressing the volume down key, you can exit the Samsung Odin Mode and your device will reboot. If you “Continue” further, you will be directed to flash your device or introduce a new firmware.
However, when you press the volume down button but are unable to exit the Samsung Odin Mode, you are said to be experiencing what is called an Odin fail issue. In this situation, your phone will not restart and remain stuck at the Samsung Odin Mode screen. Just in case if you press the volume up key and move on to flashing a new ROM/firmware, you can come out of the Samsung Odin Mode by following a few simple steps which are explained in the following segment.
Reader Interactions
Discussion
Hi Rakesh,
I am facing problem to use odin for my samsung A6 2016. I downloaded Odin and extract all but when i press start, a small new windows open with message (No binary is selected), i tried a lot but not succeed. Now my gsm hanged on (Downloading do not turn off target). It will be a kind if you guide me to solve it.
I was Searching for this madly thanks.
You’re welcome! Keep visiting!
how use odin pattern lock remove
Any idea where Net Odin is.
What do you mean by Net Odin?
how to unlock samsungxcover3
What help do you need?
please help me, i am having problems on my phone samsung galaxy grand neo plus GT-I9060I / DS when upgrading. after that just appears the logo “samsung galaxy grand neo plus powered by android” it will also die and live alone and only until the logo display.
am from Indonesia
please help me … i want to sofware samsung V2 in mode windows .. please send me firmeware .. tanks … [email protected] sent to my gmail ..
What’s your phone’s model number?
please i use a samsung j5 which do i download?
because i really wana flash my phone please
am from nigeria
Download the latest version.
which one would I use for a samsung galaxy tap 2 10.1 that say’s GT-P5110?
please answer as soon as possible
Hi Rekesh, my galaxy note 4 is stuck on recovery booting…. set warranty bit: recovery
Hey Rakesh, I just bought a used G955U and for some unexplainable reason its without full firmware or real rom, all it has is a combination bootloader that lets me test the phone.
This is the installed “rom” and I would just really like to run a stock firmware, but I can’t get it to work. Flashing attempts of any kind keep ending up failing. do you have any advice on what i could do? It also shows on the screen rpmb fuse blown. Thanks
Can you show me the Odin screenshot?
Thanks for the response, but I got it working. Apparently my G955U is locked to AT&T
Hi Mr rakesh. How is it going sir hope you are doing good. I have the Samsung galaxy s8+ sm-g955fd duos international version from the UAE but I want to change to a different country firmware. Could you tell which one I could use please. Am from Jamaica. I would appreciate your quick response
You can send your reply to my email address is [email protected] . Thanks
Thanks for response mr.rakesh ,but which one would you recommend been that am in the Caribbean?
Why do you want to change the firmware? Are you having any issues?
No Mr rakesh I don’t have any issues with it but I just figured been in Jamaica maybe I could use a different firmware that is closer to me a just saying
Hi rakesh I have the s8+ duos,model sm-g955fd with the UAE firmware. Could you tell me which other firmware I can use. You can reply to me by email. My email address is [email protected] and I am from Jamaica
Hello, I am Rio from Indonesia. Failed flashing n7000. I used odin 3.07, 3.09, 3.10. Firmware from korea, UK, and Taiwan. Failed when …setup connection / erase … /complete (write) operation failed. I used laptop Win 7 64-bit. Turned all antivirus and windows firewall. What should I do? Thanks before.
Make sure you phone is booted into the download mode properly and is detected by Odin.
Which one do I use on my j7 prime..i still haven’t get the update
Download the latest version. What’s the model number of your phone?
your shit is not valid win32 apps.
Im stuck in odin mode my device is samsung J100f what should i do?
What error are you getting?
Works like a champ. We received 20 S6 devices with version 5.1.1 but in Verizon system it stated they had already upgraded to 7.0 so we could not utilize 4G LTE signal. Found this app and was able to quickly get them going.
Glad to know, Kevin!
Glad to know, Kevin!
Hey i cant update my system since it said my registration failed i am using s6 egde plus plz some help
Can you show me a screenshot showing the issue?
hello, My name is Jenny from philippines, I’m using Samsung Galaxy J5… My problem is my phone wont on… its stuck on Samsung J5 Logo and restart again… can you help me?
It’s done sir … I installed and enjoying new features … So nice of u
Further updates will be available or not??
Since you are using the phone outside the US, you’ll not get OTA updates.
Good morning dear… I have to ask something.. my mobile don’t show mobile data on off in quick setting option? What is wrong?
And 2nd thing can I update further my mobile software manually as I hv done if available?
Is it possible to update to 7.1.2 ? As i recently updated to 7.0…
Try editing the Quick setting tile settings. You may find the toggle there.
Is there new update available for S7 galaxy??
You have already updated to Android Nougat 7.0, right?
Is it possible to upgrade 7.1.2 ..as i recently updated to 7.0??
Yes, but for that the official 7.1.2 update must be released by Samsung first.
Hi Rakesh …hope u ll be fine …. i want to know tht can i change my S7 firmware from G930A to G930F??
As i already updated to android N 7.0 by following ur instructions …remember??
What is working?? Mean we can change firmware?
Where are you from?
Just click the PIT button on Odin and add the PIT file to it.
Click AP and add the firmware to it.
Check Re-Partition option in Odin.
Click the Start button.
My wife has a note 4 on T-mobile. We bought this phone second hand because we could not, and still can’t, afford a new phone. It did not have, or seem to have, this or any other major issues when we bought it, as it worked fine for about a month, with the only issue being connection problems to the GPS services in the phone.
This phone is currently stuck in a boot loop and the only screen that I can get it to load to and stay on without resetting again is the Downloading screen with the little green robot. I had gone in and done a “factory reset” and cleared the cache in the boot selection screen but I have yet to be able to physically sign in or set up the phone. Usually it doesn’t let me get this far, it starts to boot up and then reboots before the white booting screen clears, over and over and over again until I pull the battery out. It seems to stay in the downloading screen when put there, but my computer says it’s not recognizing the device, it used to read it just fine. I’m assuming that this is due to the factory reset since I cannot load to set up the device.
The issue, even though I’ve talked about a couple things, is that the phone will not actually go through a boot cycle. It’s a bit expensive to take to someone to repair the phone, and a new phone is out of the question, so any ideas would be appreciated. Phone had to have battery replaced due to swelling of the original battery (which was aftermarket) and has an official Samsung battery in it now.
It has stayed on the Downloading screen the entire time I have been typing this, so I think it is safe to assume that this screen is the only way the phone doesn’t continue resetting.
The downloading screen says as follows, and I have no idea if this is correct or messed up:
(Red) ODIN MODE (HIGH SPEED)
(White) PRODUCT NAME: SM-N910T3
(White) CURRENT BINARY: SAMSUNG OFFICIAL
(White) SYSTEM STATUS: OFFICIAL
(White) FAP LOCK: ON
(White) KNOX WARRANT VOID: 0X0
(Gray) QUALCOMM SECUREBOOT: ENABLE (CSB)
(Gray) AP SWREV: S1, T1, A1, A3, P1
(Blue) SECURE DOWNLOAD: ENABLE
(Red) UDC START